TG Pro Mac 破解版 Mac上实用的温度监测软件

系统增强 版本号:2.43

2019-10-19 5,381 百度已收录

Temperature Gauge Pro Mac版是Mac os平台上的一款非常给力的Mac电脑温度显示软件,Temperature Gauge Pro Mac版可以轻松显示出你电脑当前的整体温度,详细的告知你所有硬件的温度度数和运行情况,以方便更好的维护自己电脑。

[TG Pro 在官网上售价16美元]

TG Pro 2.43 Mac 破解版 介绍

TG Pro 让你窥视Mac中的风扇控制、温度监控和硬件诊断。没有其他的应用程序显示更多的温度传感器,或者有更多的选项通知和风扇速度。找出哪些组件变得热(并且可能过热),打开风扇速度来冷却你的MAC,得到温度警报的通知以及许多其他奇妙的特性。另外,看看是否有任何传感器,风扇或电池有缺陷的内置硬件诊断。看看为什么成千上万的人相信TG-PRO作为温度和风扇控制的应用程序。今天尝试免费试用。

你甚至可以修复IMAC风扇噪音后,HD更换问题使用TG-PRO。

TG-PRO支持所有的MACS,包括所有的MacBook Pro(包括2015个模型)、IMACS、MAC MINIS、MacBook AIR和Mac Pro(包括更新的2013个模型)。

What's New in TG Pro

Version 2.43:

  • [New] Full support for macOS Catalina 10.15.
  • [New] It's now Notarized and uses the Hardened Runtime for imp ]]>
  • [New] Removed Growl support and replaced it with native calls to the Notification Center.
  • [New] The values for the manual fan sliders are now saved immediately in case of a power outage before the app quits and saves the preferences.
  • [New] The minimum for Auto Boost gradual time is now 1 second (old was 5 seconds).
  • [New] Improved sensor naming and listing for the following Mac models:
  • MacBook Air (13-inch, 2019, 2017, Early 2015, Early 2014)
  • MacBook Air (11-inch, Early 2015, Early 2014)
  • MacBook (12-inch, 2018, 2017)
  • MacBook Pro (15-inch, Mid 2015, Late 2013)
  • MacBook Pro (13-inch, 2019, Mid 2014)
  • [Fixed] Potential crash in the Paddle service when running on macOS Catalina.
  • [Fixed] Issue where Auto Boost fan speed change timing curves wouldn't be linear.
  • [Fixed] Issue where the combination of Override System Control with Auto Boost wouldn't work as expected on app startup.
  • [Fixed] Issue where the fan speed change would be abrupt if there was no Auto Boost rule to use. It is now smooth and respects the Auto Boost gradual time setting.
  • [Fixed] Issue where Auto Boost wouldn't always work properly if there was no rule to apply on T2 based Macs.
  • [Fixed] Issue where the fan segmented control would be cut off.
  • [Fixed] Issue where the manual fan sliders may not have been available after app startup.
  • [Fixed] Issue where the dialog showing now to fix sensors not showing wouldn't always be displayed.

Version 2.41:

We were make aware of a privilege escalation vulnerability that affected TG Pro. This update resolves it by installing a new fan helper app

Fixed:
  • Issue where the temperature bars would flash on macOS 10.12
  • Issue where the shutdown reason may be out of date by updating it after waking from sleep
  • Removed NSAppTransportSecurity key from the Info.plist since it is no longer necessary
New:
  • Show an alert if there are no temperature sensors detected, with info on how to resolve it
  • Added "Use Generic Mode" for compatibility with Hackintosh (homemade Macs) models
  • Changed "10Gb Ethernet" to "Ethernet" for 2018 Mac mini models since they don't all have the 10Gb

Version 2.40:

  • [New] Improved sensor naming and listing for the following Mac models:
    • iMac Pro
    • iMac 21.5" including 4K (Late 2012-2019)
    • iMac 27" including 5K (Late 2012-2019)
    • Mac mini (Late 2018)
    • MacBook Air (Late 2018)
    • MacBook Pro 15" (2019, 2018, Mid 2017 & Late 2016)
    • MacBook Pro 13" (2018 & 2019)
  • [Fixed] Issue where the temperature bars would not draw correctly on newer versions of macOS.
  • [Fixed] Issue where certain notifications would not get logged properly.
  • [Fixed] Issue where empty rows would get created in the log file.
  • [Fixed] Issue where the Highest CPU temperature wouldn't get used for notifications in the log file.
  • [Fixed] Issue where the fan control mode would default to System if the app terminated while the Mac was asleep.
  • [Fixed] Sequential memory sensor naming for older Mac models.
  • [New] Added URL for uploading crash reports to the Internet Access Policy.
  • [New] All open windows will be brought to the front when clicking on the menubar icon.
  • [New] Changed sensor naming from "Ambient" -> "Logic Board Ambient" to be clearer.

Version 2.39:

Fixed:
  • Issue where the fan control settings may not have been restored properly after waking the Mac from sleep.
  • Issue where it was possible for incorrect high temperature notifications to be shown after waking the Mac from sleep.
  • Issue where if the fan helper had been disabled through launchd, it wouldn't have been possible to re-install it.
  • Issue with the CPU sensors for the MacPro3,1. They are now correctly identified as "Relative to Prochot".
New Features:
  • Auto Boost rules can now be reordered! Just drag the rules around to rearrange them in the desired order.
  • Added extra logging for fan control mode changes to help with any future debugging of issues.

Version 2.33:

Fixed:
  • TG Pro now requires macOS 10.10 or higher
  • Support for macOS 10.14 Mojave including the system Dark Mode
  • Added ability for TG Pro to be remotely deployed by having it silently install the fan helper, setup preferences and register itself. See how here
  • Added new preference to display the menubar override system icon in black/white instead of red
  • The "Fan control not available" dialog now contains a button to reinstall the fan helper and a clickable link to email support
TG Pro Mac 破解版 Mac上实用的温度监测软件-麦氪派

TG Pro 2.43 Mac 破解版 下载

免费下载 高速下载 荔枝正版
                   
  • App 打开报错,App 打开闪退,App 无法执行,App损坏等各种错误情况,解决处理方法请进
  • 本站所有软件均收集于网络,仅供个人测试研究,请在24小时内删除,如需商用请购买正版
  • 解压密码:本站所有镜像和压缩文件打开密码均为:www.WaitsUn.com
               
打赏
  • 打赏支付宝扫一扫
  • 打赏微信扫一扫

麦氪派

我们不Hack软件,我们只是优秀软件的搬运工。

历史版本下载

获取帮助 荔枝正版 2.42 下载 2.40 修正下载 2.40 下载 2.33 下载                

关注我们的公众号

微信公众号